Door toggles
By turning the door toggles, the door profile presses into the door rubber seals and the door is sealed watertight. Door toggles are available in various types: standard, flush, blind and central locking. The central lock is available separately or as an integral part of a watertight door (the so-called Quick-Pin type).
More information
More information about door toggles
The pictures below show the differences between the different types of door toggles.
Standard door toggle |
Flush door toggle |
Blind door toggle |
Centrally operated door toggle (separate) |
Centrally operated door toggle (QuickPin) |
Applications of door toggles
The above types are used in the following way:
- Standard door toggles are used when a room has to be opened and closed from both sides.
- Flush door toggles are used if no protrusions, which could cause people to trip or get caught in (e.g. flush hatches), are permitted. By using flush door toggles, the room can only be opened and closed from one side with a lever. If necessary, the flush side of the door toggle can be opened using a pipe spanner.
- Blind door toggles are used if a room is to be accessed from one side only, such as an escape door or escape hatch in an engine room.
- With central locking, several door toggles are operated simultaneously by means of one lever. As a result, doors can be locked or unlocked with a single action. Central locks are available in two versions:
- Separate central locking: several toggles in the vertical plane are operated at once;
- Quick-Pin: several toggles in both the vertical and horizontal plane can be operated at once.
Various versions
The various types consist of a number of individual components that can be combined in various ways:
- Outer bush type: steel, stainless steel or aluminium
- Lever type: steel (forged) or polished stainless steel
- A stainless-steel bushing is always combined with a polished stainless-steel lever.
- A steel or aluminium bushing is always combined with steel levers.
- A stainless-steel lever and stainless-steel toggle are always combined with a steel or aluminium bushing.
- The separate components can also be put together differently as required.
Stainless-steel components are always quality stainless steel 316 (stainless-steel plate material and profiles) or A4 (bolts and nuts).
Most components can also be supplied separately.
